Sample Tubes
For EPR spectroscopy we recommend using sample tubes manufactured by SP Wilmad-LabGlass. The following tube sizes can be used with the sample holder:
S/X-Band EPR Spectroscopy
| OD | Tube | Link |
|---|---|---|
| 2 mm | e.g. Wilmad, 721-SQ | Weblink |
| 3 mm | e.g. Wilmad, 705-PQ | Weblink |
| 4 mm | e.g. Wilmad, 707-SQ | Weblink |
Q-Band EPR Spectroscopy
| OD | Tube | Link |
|---|---|---|
| 1.6 mm | e.g. Wilmad, WG-221T-RB | Weblink |
Other sample tubes can be used too, as long as they fit into the sample holder.
Warning
Only use sample tube/capillary sizes that are recommended by Bridge12 Technologies for the particular probe. Using sample tube/capillary that are too big for the probe can result in irreparable damage to the probe, the sample or both.
Other Probe Stick Consumables
| Part Description | Vendor | Vendor Part Number | Link |
|---|---|---|---|
| O-Ring (Sample Holder Extension) | McMaster | 9464K12 | (McMaster: 9464K12) |
| Spring (Sample Holder) | McMaster | 8969T606 | (McMaster: 8969T606) |
If you require additional sample holders, or sample holder extensions, please contact Bridge12 at ino@bridge12.com.